Sleigh Ride Scene

 

                    Create a Sleigh Ride Scene 

                             to display throughout the season! 

Create this sleigh ride scene with a timeless wooden sled & delicate poinsettias on a snowy hill using mainly watercolors and markers. This project card (I'll call it a project because it includes 3D folding) isn't as difficult as it might look. I achieved the winter colors in variety of ways including using watercolors, stencils, and Shimmer Relief paste. You can learn these techniques taught by Erum Tasneem in her Altenew Academy class Creative Coloring with Erum, Advanced Techniques. The class is filled with tips on various ways to add color. Many of the lessons focus on florals, but as you can see, the techniques can be applied to other objects. I snagged this class on sale a couple of weeks ago. Don't forget to check the weekly sales for classes. Come along and I'll show you more!

Faux Wood Timeless Sled

I wanted to give the sled a wooden, antique look so I used watercolors to achieve the wood texture. Using watercolor paper, cut out the Timeless Sled die pieces and apply a basic wash of light brown. Then add the wooden texture with a dry brush technique. Swipe the darker brown lines in a jagged motion from the edges in. Including some circular notches makes it look more like real wood. To maintain the strokes, dry the paper in between layers. 

     

TIP: If your wood is to light like mine was, just give it another was of color over the wood grain strokes and start again. I actually darkened mine three times, until I achieved the look I wanted. It is always better to start lighter and darken. 

 


TIP: Not sure if it looks good? Assemble the sled without gluing and take a picture. Sometimes when I look at a picture, it's like seeing with fresh eyes. Something stands out that I need to change. I wanted the wood darker yet, so I washed color over the top and added more wood grain. 

Once the sled was dry, assembly was super easy with the Altnew keyhole system. Just line up the little keyhole following the numbers imprinted on the pieces. #1 will be on the bottom. The rail pieces were cut from metallic silver paper. Be sure to leave a little space for the gifts to tuck inside the sled. Go ahead and make the pillow and gifts to complete the sled. Pattered paper is fun for variety or just add stripes to a gift with markers. 

Create a Snowy Background

. 

To create the look of blustery, blowing snow, use the drip technique. Start with damp watercolor paper, then drip some clean water where you want the color to run. Then drip the color in the same areas. The watercolor will follow the lines of water. 

TIPS:  Too much water? Drips went too far? Just dab with a paper towel. 

 

Dry the paper and run it through a snowflake embossing folder. TIP: Leaving it a little damp will ensure the card stock doesn't crack when embossed. I strategically placed my drips of color in the areas of the paper where the snowflakes would be. 

                  

To add some shimmer and snow texture, apply Altenew Shimmer Relief Paste in pearl. You can use a pallet knife/tool for a smoother application. I used my finger in areas I wanted it to be thicker and more uneven, like snow drifts. This dried quicker than I expected. It was dry enough to assemble everything in an hour or so, even the thicker parts. 

TIP: Be sure to clean your tools right away and don't apply the paste on your sticky mat like I did. It took some work to get it off! 

                        Marker Coloring the Poinsettias

Use alcohol markers to color the poinsettias. I started with a base of blush color because I cut them from white card stock. Then add the color, darkest color first, using flicking motions with the brush tip. The next lighter color is used to pull the color out from the center out or from the tip inward. Be sure to leave light areas for added interest and a more realistic look. Assembly is easy again with the keyhole in the center.  

TIP #1: These flowers are small, so I kept them nested in the card stock piece so they didn't move around on my mat so much. 

TIP #2: Vary the colors if you are making several blooms. One bloom was Rouge, Crimson and Velvet. I made the next bloom a little different by adding in a brighter color, Cotton Candy. The last bloom is darker by using Grapevine. You can also vary the leaf color. 

Watercolor the Frame Piece

This was my favorite part! This frame is made with a stencil used as a guide for watercoloring. It was so relaxing and easy. I actually made three different panels because I wasn't sure what colors would look best. 

    . 

Start by applying a very light color ink to watercolor paper through the stencil. Here I used Altenew Polar Bear blue ink which is super light. For the green panel, I used Fireflly ink with a light touch. The stenciled light ink acts as a guide for where to place your watercolor. Just wet a leaf with plain water, then apply the color. To vary the shading on the leaf, apply the color (Evergreen) to the base and pull the color out in an ombre effect. Let the leaf dry and work on another one. Check back to see what each leaf needs once it is dry. I added some more intense color and a different shade with a blue tint (Emerald) in some areas. For the blue leaves, I used a mixture of Caribbean Sky (very light) and Persian Blue (dark). 

 The stems and berries were painted with a wet on dry technique using Mocha. You can add some shine to the berries with a swipe of metallic watercolor paint. I used an icy blue tinted metallic color. 

Making the 3D Frame (It's not really that hard!)

Cut out the shape of the window you'd like to use. I used an oval, but any shape will work. Just be sure to leave enough space around the shape for the paper to stand firm. 

TIP: Save the oval piece you cut out for another card!

.    

To make the frame pop out from the background, you just need some accordion folded pieces for both sides. Personally, I dread reading measurements for where to fold and cut a bunch of pieces! So here's the easy way I did it: Start with a white piece of cardstock the same height as your card (4.25 inch). Place it on your scoring board. You'll need to make a total of 8 sections, the first and last section are a bit larger because they need extra space to attach to the card top and bottom. 

Here we go! Make the first score mark 3/8 inch from the end, then make score marks at every 1/4 inch until you have 7 small sections (the first section is 3/8 in., then six 1/4 in. sections). The last section needs to be 3/8 in. Then cut off the excess card stock and fold! Do this again so you have two accordion folded pieces. 

Assembling the Card

Glue the snowy background panel in the bottom fold so the larger piece wraps around the back of the panel. Then temporarily arrange the sled, sentiment and any pieces you want on the background and lay the frame on top. Check to see what is visible with the frame in place, especially the sentiment! Make adjustments and glue the pieces to the back ground. I popped the sled up with foam tape and gave some elevation to the sentiment by backing it with 3 more die cut pieces. 

Next glue on the top frame piece. Finish the card by adhering the flowers and greenery on the corners of the frame. The card will flatten to fit in an A2 envelope and stand up for display. Such a magical scene! 

. 

Altenew Supplies:

• Timeless Sled die, Sleigh Ride Greetings stamps & dies
• Layered Snowflakes 3D embossing folder
• Leaves & Berries stencil
• Watercolor paper 140 lb cold pressed
• 36 pan watercolor set
• Shimmer Relief Paste, Pearl 
• Fine detail watercolor brushes
• Alcohol markers: rouge, crimson, velvet, cotton candy, grapevine, Pocket Full of Sunshine set
• Garnet glitter cardstock

Other supplies:

• Metallic silver paper (sled rails), metallic gold paper
• Metallic Pastel watercolors (Art Philosophy)